SWIFT DISPENSING SOLUTION
All in one enclosed pressure reduction equipment.
The Swift Decanter has been designed to take high pressure CNG or RNG and reduce the pressure to useable levels for your industrial burner tip application or injecting directly into the pipeline. Our years of decanting experience have resulted in this equipment being successfully tailored to meet the desired flowrate and inlet conditions any fleet requires.
The Swift Decanter is a modular design and can be transported easily between sites and deployed with relative ease. Once installed at a site, gas is able to continuously flow into the application. Our integrated PLC management system ensures there are no interruptions due to vehicle switchovers.
Once connected to your burner tip application or injection point, the Swift Decanter will take the gas from high pressure trailers and reduce the pressure down to the required inlet conditions. Heaters are sized in the decanter to ensure outlet pressure and temperature is continually maintained. A number of inlet connections can be provided for 2, 3, or 4 trailers in order to meet operational requirements. Drivers will only need to connect the trailer to the Swift Decanter and subsequent switchover from one trailer to another will be automatic. The HMI on the decanter will provide prompts indicating when trailers are safe to disconnect.
The Swift Advantage
Unlike a traditional fuelling station, the Swift EasyFlo cuts down on
unnecessary project complexities, while only offering a better product.
COMPLEXITY
Design/Build Duration
PROJECT COSTS
MAINTENANCE COSTS
FUELLING COMPOUND SIZE
FLEET FUEL SUPPLY CONTRACT TERM
PORTABILITY
FLEXIBILITY
Features
- Compression Ratio: 8:1 or Higher
- Inlet Pressure Range: 200 psig to 3900 psig
- Outlet Pressure Range: 3000 psig to 4500 psig
- Ambient Temperature Range: -40ºC to +65ºC
- Flowrate: Up to 2500 SCFM (18.5 DGE/min or 70 DLE/min)
- Hydraulic Motor HP: 75 HP
- Supply Voltage: 600 V, 3 Phase, 112 Amps
Standard Compliance
- CSA B108 Compressed natural gas fuelling stations installation code
- CSA B51 Boiler, pressure vessel, and pressure piping code
- CSA 12.8 Natural gas vehicle fueling station reciprocating compressor guidelines (Applicable Sections Only)
- CSA 22.1 Canadian Electrical Code
- TSSA CNG Code Adoption Documents
Certifications
- CAN/CSA-C22.2 No. 14-18 CAN/CSA-C22.2 No. 60079 –0: Industrial Control Equipment Explosive Atmospheres – Part 0: Equipment – General Requirements
- CAN/CSA-C22.2 No. 60079 –1: Explosive Atmospheres – Part 1: Equipment protection by flameproof enclosures “d”
- CAN/CSA-C22.2 No. 60079 –15: Explosive Atmospheres – Part 15: Equipment protection by type of protection “n”
Specifications
- Inlet Pressure Range: 200 psig to 3900 psig
- Outlet Pressure Range: 5 psig to 3900 psig
- Ambient Temperature Range: -40ºC to +65ºC
- Flowrate: Up to 2500 SCFM (18.5 DGE/min or 70 DLE/min)
- Supply Voltage: 600 V, 3 Phase, 112 Amps
Safety Compliance
- CSA B108 Compressed natural gas fuelling stations installation code
- CSA B51 Boiler, pressure vessel, and pressure piping code
- CSA 22.1 Canadian Electrical Code
- TSSA CNG Code Adoption Documents
Certifications
- CAN/CSA-C22.2 No. 14-18 CAN/CSA-C22.2 No. 60079 –0: Industrial Control Equipment Explosive Atmospheres – Part 0: Equipment – General Requirements
- CAN/CSA-C22.2 No. 60079 –1: Explosive Atmospheres – Part 1: Equipment protection by flameproof enclosures “d”
- CAN/CSA-C22.2 No. 60079 –15: Explosive Atmospheres – Part 15: Equipment protection by type of protection “n”
Specifications
- Compression Ratio: 8:1 or Higher
- Inlet Pressure Range: 200 psig to 3900 psig
- Outlet Pressure Range: 3000 psig to 4500 psig
- Ambient Temperature Range: -40ºC to +65ºC
- Flowrate: Up to 2500 SCFM (18.5 DGE/min or 70 DLE/min)
- Hydraulic Motor HP: 75 HP
- Supply Voltage: 600 V, 3 Phase, 112 Amps
Standard Compliance
- CSA B108 Compressed natural gas fuelling stations installation code
- CSA B51 Boiler, pressure vessel, and pressure piping code
- CSA 12.8 Natural gas vehicle fueling station reciprocating compressor guidelines (Applicable Sections Only)
- CSA 22.1 Canadian Electrical Code
- TSSA CNG Code Adoption Documents
Certifications
- CAN/CSA-C22.2 No. 14-18 CAN/CSA-C22.2 No. 60079 –0: Industrial Control Equipment Explosive Atmospheres – Part 0: Equipment – General Requirements
- CAN/CSA-C22.2 No. 60079 –1: Explosive Atmospheres – Part 1: Equipment protection by flameproof enclosures “d”
- CAN/CSA-C22.2 No. 60079 –15: Explosive Atmospheres – Part 15: Equipment protection by type of protection “n”